Instructions / Assembly

Step Step 17
418142 www.sauder.com/servicesPage 22
1
2
The DOOR STOPS with the
RUBBER SLEEVES must be here.
J
A
K
B
C
O
Be sure the top surface of
the BASE and BOTTOM
are even. Tighten three
SCREWS in the BASE.
å
Flip your unit onto its BACK. Fasten the RIGHT LEG (J) to the RIGHT
END (A) and the LEFT LEG (K) to the LEFT END (B). Tighten eight
HIDDEN CAMS.
å
Fasten the CENTER MOLDING (O) to the UPRIGHT (C). Tighten four
HIDDEN CAMS.
å
Fasten the BASE (L) to the LEGS (J and K). Turn two BLACK 9/16"
LARGE HEAD SCREWS (1S) through the DOOR STOP/TIE PLATES (3G).
å
Tighten the screws that hold the BASE (L) to the METAL BRACKETS on
the BOTTOM (F).
BLACK 9/16" LARGE HEAD SCREW
(2 used for the TIE PLATES)
1S
F
3G
3G
DOORS OPEN RIGHT
L