sauder.com How else are you gonna know which end is up? Full/Queen Headboard Cannery Bridge Collection | 419932 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-14 Hammer Français 15-16 Español 17-18 Warranty Page 2 Not actual size Skip the power trip. This time. 19 419932 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A TOP (1) B END PANEL (2) C CENTER PANEL (2) D RIGHT LEG (1) E LEFT LEG (1) F LEG MOLDING (2) G VERTICAL MOLDING (6) H MOLDING (2) I BRACE (1) D A H B E I C F C G G B G G G G H F www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1F HIDDEN CAM - 14 22F DOUBLE DOWEL - 4 2F CAM DOWEL - 6 13M WASHER - 8 12S BROWN 1" FLAT HEAD SCREW - 48 101S Page 4 15F WOOD DOWEL - 15 24M NUT - 4 93S BLACK 1-1/4" MACHINE SCREW - 4 BLACK 1-1/2" FLAT HEAD SCREW - 10 419932 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push fourteen HIDDEN CAMS (1F) into the PANELS (B and C), LEGS (D and E), and BRACE (I). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM except for the LEGS and BRACE. å NOTE: Be sure to position the END PANELS (B) exactly as shown.
Step 2 å Fasten the VERTICAL MOLDINGS (G) to the PANELS (B and C). Use eighteen BROWN 1" FLAT HEAD SCREWS (12S). Remember: Righty tighty. Lefty loosey. 12S BROWN 1" FLAT HEAD SCREW (18 used in this step) U su nfin rfa ish ce ed B G U su nfin rfa ish ce ed C G C U su nfin rfa ish ce ed G Edge with CAM DOWEL G B U su nfin rfa ish ce ed G G Page 6 Edge with CAM DOWELS Edge with CAM DOWEL Edge with CAM DOWELS 419932 www.sauder.
Step 3 å Insert six WOOD DOWELS (15F) into one of the CENTER PANELS (C) and three in the other CENTER PANEL (C). å Insert the WOOD DOWELS (15F) in one edge of the CENTER PANELS (C) into the holes in the other CENTER PANEL (C) exactly as shown. (9 used) 15F U su nfin rfa ish ce ed C U su nfin rfa ish ce ed C Edge with CAM DOWEL www.sauder.
Step 4 å Insert six WOOD DOWELS (15F) into the END PANELS (B) exactly as shown. å Then, push the END PANELS (B) onto the WOOD DOWELS in the edges of the CENTER PANELS (C) exactly as shown. 15F Edge without HIDDEN CAMS U su nfin rfa ish ce ed B Edge without HIDDEN CAMS C C The VERTICAL MOLDING on the underneath surface of the END PANEL should be here. U su nfin rfa ish ce ed B 15F Page 8 The VERTICAL MOLDING on the underneath surface of the END PANEL should be here. 419932 www.sauder.
Step 5 å Fasten the MOLDINGS (H) to the PANELS (B and C). Use sixteen BROWN 1" FLAT HEAD SCREWS (12S). Now might be a good time to refresh your drink. 12S BROWN 1" FLAT HEAD SCREW (16 used in this step) U su nfin rfa ish ce ed C U su nfin rfa ish ce ed B U su nfin rfa ish ce ed C B U su nfin rfa ish ce ed H H The holes must be closer to this edge. The holes must be closer to this edge. www.sauder.
Step 6 å Fasten the BRACE (I) to the CENTER PANELS (C). Use six BROWN 1" FLAT HEAD SCREWS (12S). 12S S HI urfa DD ce EN wi CA th M S BROWN 1" FLAT HEAD SCREW (6 used in this step) I C C Depending on which way the BRACE (I) is positioned, you may use either set of holes. Page 10 419932 www.sauder.
Step 7 å Fasten the TOP (A) to the PANELS (B and C). Tighten six HIDDEN CAMS. å NOTE: You may need to place packing foam and magazines underneath the PANELS when fastening the TOP. B C C A B This long edge should overhang the PANELS more than the other long edge. For support, place packing foam and magazines here. Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate. To completely tighten: www.
Step 8 å Push the LEG MOLDINGS (F) onto the WOOD DOWELS in the END PANELS (B). Surface with small holes B F Surface with small holes B F Page 12 419932 www.sauder.
Step 9 å å å Insert four DOUBLE DOWELS (22F) into the BRACE (I). å Then, fasten the LEGS (D and E) to the LEG MOLDINGS (F). Use ten BLACK 1-1/2" FLAT HEAD SCREWS (101S). Fasten the LEGS (D and E) to the BRACE (I). Tighten eight HIDDEN CAMS. Fasten the LEGS (D and E) to the END PANELS (B). Use eight BROWN 1" FLAT HEAD SCREWS (12S).
Step 10 å å Carefully stand your unit upright. å This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. Pro Tip: Lift with your legs. And, you know, your arms. Fasten your unit to your bedframe. Use four BLACK 1-1/4" MACHINE SCREWS (93S), eight WASHERS (13M), and four NUTS (24M) through the LEGS (D and E) and into the bedframe.
Tête de lit (Lit grand format et Lit très grand format) 419932 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision.
ÉTAPE 1 ÉTAPE 7 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Fixer le DESSUS (A) aux PANNEAUX (B et C). Serrer six EXCENTRIQUES ESCAMOTABLES. Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Enfoncer quatorze EXCENTRIQUES ESCAMOTABLES (1F) dans les PANNEAUX (B et C), les PIEDS (D et E) et l'ENTRETOISE (I).
Cabecera para cama de tamaño matrimonial o "reina" 419932 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 7 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Fije el PANEL SUPERIOR (A) a los PANELES (B y C). Apriete seis EXCÉNTRICOS ESCONDIDOS. Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Empuje catorce EXCÉNTRICOS ESCONDIDOS (1F) dentro de los PANELES (B y C), las PATAS (D y E) y la RIOSTRA (I).
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
