Instructions / Assembly

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty carton to avoid
scratching your unit or the fl oor.
å
Push fourteen HIDDEN CAMS (1F) into the PANELS (B and C), LEGS (D
and E), and BRACE (I). Then, insert the metal end of a CAM DOWEL (2F)
into each HIDDEN CAM except for the LEGS and BRACE.
å
NOTE: Be sure to position the END PANELS (B) exactly as shown.
419932www.sauder.com/services
Page 5
Arrow
1F
2F
(6 used)
Do not tighten the HIDDEN
CAMS in this step.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
(14 used)
1F
Arrow
Do not insert CAM
DOWELS into these parts.
Arrow
1F
1F
Arrow
D
E
I
B
C
C
B
Do not insert
HIDDEN CAMS
into these holes.
Unfi nished
surface
Unfi nished
surface
Unfi nished
surface
Unfi nished
surface
These holes
must be here.
Do not insert
HIDDEN CAMS
into these holes.
These holes
must be here.