Si20 Spec Sheet
16312347600 | SALES.USASAUERMANNGROUP.COM | 415 OSER AVE., SUITE P, HAUPPAUGE, NY 11788
WWW.SAUERMANN.US
FLOW RATE
DISCHARGE HEAD
Slim design for a quick install inside
the air conditioning unit.
Clear PVC hose,
1
/
4
” i.d.
• ACC 00105: 16ft roll
• ACC 00150: 164ft roll
SCAN THIS QR CODE
FOR ADDITIONAL
Si20 TECHNICAL
INFORMATION
Si-20
Mini condensate
removal pump
MAX. FLOW RATE: 5.0 gph
MAX. SUCTION HEAD: 10ft
MAX. DISCHARGE HEAD: 33ft; ow rate = 1 gph
MAX. PRESSURE: 46ft; ow rate = 0 gph
SOUND LEVEL AT 3.3FT: 22 dBA according to EN ISO
3744 (Measured at LNE lab, pump operating with water,
out of application)
POWER SUPPLY : 120 V ~ 60 Hz - 14 W
(SI20UL01UN12)
230 V ~ 50/60 Hz - 14 W (SI20UL01UN23)
INSULATION CLASS: Double Insulation
DETECTION LEVELS: On:
5
/
8
” • O:
7
/
16
” • Safety:
3
/
4
”
SAFETY SWITCH: NC 8A resistive - 250 V
THERMAL PROTECTION: 240°F auto-reset
OPERATING CONDITIONS: 120V - 50%: 3s ON – 3s OFF
230V - 60%: 3s ON – 2s OFF
PUMP DIMENSIONS: L 5
3
/
8
” x W 1
1
/
2
” x H 1
1
/
2
”
SAFETY STANDARDS: UL / CSA certied by Intertek
RoHS & WEEE DIRECTIVES: Compliant
PACKAGING: 1.1 lbs - L 6
3
/
4
” x W 6
3
/
8
” x H 2
7
/
8
”
MASTERPACK: 6 pieces
Actual ow rates (GPH) Sound level Recommended accessories
Self-sealing tting
to connect discharge
tube to drain pipe.
• 6 pcs, for 1/4” i.d.
What’s in the box
• Si-20 piston pump with clear pvc tube tted
with a pre-mounted drain safe device
• 5’ power cable: 2 power wires,
2 safety contact wires
• Clear PVC tubing, 2’ with foam
• Anti-vibration rubber damper
• Detection unit – Si2958, 2’ cable
• Detection unit installation kit:
- Rubber elbow
- Vent tube
- Split connector
- Mounting rail
- Adhesive
- 3 double wire clamps
- 3 tie wraps
SI-20 PUMP
= 22 dBA
302520 35 40
NOISESILENT
Si-20 tech specs
• 5 gph max. ow
• 33' max. discharge
PERFORMANCE
• Up to 5.5 tons
• Wall mounted
• Ducted units
• Suspended ceiling units
• Floor mounted units
SUITABLE FOR
Key features
• Slim design
• Rubber dampers
• Incredibly quiet
• Drain safe device