User guide

13
Calibrate the temperature
The function is not available for this product.
Activate Smartsauna
Smartsauna is a function that measures the temperature in the sauna and computes the
length of time the heater will take to heat the sauna to the temperature that is set on the control
panel. The function only works when it is activated and in conjunction with a time setting.
1. Push the button prog ok for
three seconds
2. Page to the menu 4 with the
button prog ok
3. Chose Smartsauna ON with
the arrow buttons
4. Approve the activation with
the button prog ok
Activate Smartsauna
Make sure that the control panel is in Off-
mode before you activate Smartsauna.
Example:
You have had a hard day at work
and wish to relax with a sauna
bath directly when you come
home. When you arrive home at
16:00, you want the sauna to be
ready for you. By activating the
function Smartsauna the control
panel computes when the heater
should start, in order to warm up
the sauna to the temperature you
have chosen on the control panel.
Information to the user