User guide

15
Alarm Display What to do
Alarm
When there is an alarm situation, the control panel stops the heating, and the cause for
the alarm is shown on the display of the control panel.
Maintenance
Sauna stones
We recommend that you brush and rinse the sauna stones free from grit before placing
them in the stone compartment. If the stones begin to crumble, you should replace them
as soon as possible. Read more about sauna stones on page 4.
The sauna
The sauna should be kept free of dirt and odors, just like the bathroom. Remove any
accumulations of water and salt with the help of soft soap and water. Furthermore, be
careful not to keep laundry and other fire hazardous material close to the heater.
Vent
In the sauna there is a vent (outlet vent) that releases warm air. Clean the outlet vent
with water and soft soap once or twice a year.
Check the cause. Reset
the sensor by pushing
the reset button with a
screwdriver.
ALARM
CLEAR T1
ALARM
T1 CABLE OFF
Check the cable to and
from the sensor.
Information to the user
The cable of the
temperature sensor
is broken.
The temperature sensor
is triggered.