User guide

20
Important information to the
installer
This user guide is an important tool for you
who will mount and install the sauna heater
Pikkutonttu. There are several installation
dimensions that must be followed exactly due
to safety requirements. If you have any
questions during the installation we
recommend you to turn to your retailer.
When the mounting and installation are
completed, we would like you to give this user
guide to the user. Do not throw it away but
make sure that the user gets the user guide in
order to be able to handle the digital control
panel. Use the checklist to be sure that all the
steps in the installation process have been
completed.
1. Read this user guide carefully
2. Check that all the parts are delivered
3. Mount the temperature sensor in the
sauna
4. Mount the control panel in or on the
surface of the wall
5. Connect the electrical cables to the
heater
6. Mount the heater in the sauna
7. Program the basic settings in the control
panel
8. Test heat the sauna and make the
necessary safety measurements
9. Give this user guide to the user after
finishing the installation
Check list
Before you start the heater
with the control panel, make
sure that you have gone
through all the steps in the
check list and that the sauna
is ready to be used.
Observe!
Follow the installation
dimensions given in this
user guide.
Only one heater may be
installed in the sauna room.
A certified electrician, in
accordance with the valid
regulations, must do all the
electrical connections.
If you have questions or
need help with the
installation, turn to your local
retailer.
Observe!
Information to the installer