User guide

22
Mount the heater and tempera-
ture sensor
To mount the heater requires thoroughness by the installer. The different models of sauna
heaters have their own specific installation dimensions, and these must be followed exactly
due to safety reasons.
There are three separate ways to mount the heater in the sauna: wall mounting, corner
mounting and floor mounting. In the following pages you will find sketches for the
placement of the heater in the sauna room and which choices there are to mount the
temperature sensor. The installation dimensions are exact – they cannot be deviated from.
Observe that you should not mount the heater until you have connected all the cables.
Output
heater
(kW)
Volume
sauna room
(m
3
)
Height
sauna room
(mm)
Installation
distances, A
(mm)
4,5
6,5
9,0
3-6
5-10
9-14
1900
1900
1900
40
150
150
Facts and installation measuremets
Mount the heater:
There are three separate ways to mount the heater:
1. Wall mounting
2. Corner mounting
3. Floor mounting
Follow these instructions:
1. Study the installation dimensions in the pictures and the table on pages 23–24.
2. Mark the walls and floors where the equipment should be mounted and holes
should be drilled.
3. Fasten the brackets on both sides of the heater. Use the bracket screws,
4,2 x 9,2 mm, that came with the delivery. When mounting on the floor you
fasten the bracket between the heater and its foot. See page 24.
4. Place the heater in its place.
5. Fasten the heater on the wall or on the floor. Use the bracket screw,
4,2 x 16 mm, that came with the delivery. Screws for floor mounting do not
come with the delivery.
Information to the installer