User guide

26
Network connection
Lighting and ventilation
Temperature
sensor
Connecting the electricity is the
most important part of the
installation of a sauna heater. Only
certified electricians may install the
sauna heater. When the connection
to the electricity network is made a
standard cable HO7RN-F must be
used (for example RHH or VSB).
Connect the
electricity
Heating elements
(see the dimensions on page 27)
Control of external electrical appliance
(for example a heating element)
To the heater
1. Lay the heater down and unscrew the
feet and screws that keep the bottom
plate in place.
2. Attach the sensor cable to the socket
J12. Observe the color codes on page
27.
3. Attach the sensor cable to the sockets
J10 and J11. Observe the color codes
on page 27.
4. Shorten the cables so that they do not
reach the dotted area according to
picture 1 on page 27.
5. Fasten the bottom plate and the feet and
stand up the heater.
6. Connect the cables for lighting and
ventilation, if needed.
Connect electrical cables
Information to the installer
Control
panel