Saunatec HELO HSX Steam generator Mounting Instructions User Instructions USER GUIDE Read Instructions carefully before fitting NOTE: All plumbing and electrical installation work may be carried out by authorized personnel only and in accordance with local installation and wiring regulations.
SAUNATEC HELO HSX Steam generator CONTENTS: Page. General information 3. • Product description Mounting and installing HSX steam generator • • • • • Mounting location Mounting the generator and steam supply pipe Electrical supply and connection diagrams Water supply User and service manual • • • • • • • • • • • • • • 4. 9.
SAUNATEC HELO HSX Steam generator General Information Product description: The New HELO HSX steam generator is a top quality and easy-to-service steam generator designed for domestic and commercial use. The HELO HSX steam generator is developed to be user-friendly giving its user various options in enjoying the steam bath. The digital control unit can be mounted inside or outside the steam room. The steam generator can be equipped with an optional drain-valve for an automatic drain and flush program.
SAUNATEC HELO HSX Steam generator Mounting and installing HSX steam generator Mounting location: The HELO HSX steam generator is to be mounted in a dry space next to the steam room (i.e. in a maintenance room, cupboard, adjoining room, loft or cellar). The steam generator requires water- and electrical supply (see below) and a floor-drain. The length of the steam pipe is recommended to be maximum 5 meters (16ft). DO NOT FIT THE STEAM GENERATOR INSIDE THE STEAM ROOM.
SAUNATEC HELO HSX Steam generator Mounting the generator and steam supply pipe: The steam generator can be floor standing or wall mounted using the L-brackets (included in package). When mounting the steam generator to the wall use the keyhole slots in the L-bracket Use suitable screws according to wall material and local standards. NOTE: HELO HSX-steam generator’s weight when filled with water is approx. 17 kg. Check construction instruction when fastening the steam generator to wall for proper fastening.
SAUNATEC HELO HSX Steam generator Electrical supply Fused mains electricity should be terminated with an isolator adjacent to the steam generator. The supply should be rated according to the generator to be fitted and not less than the following: Power 3.4kW 4.7kW 6.0kW 7.7kW 9.
SAUNATEC HELO HSX Steam generator 3 N~ Main switch 1 N~ L3 L3 L2 L2 L1 L1 N N N N Gr Gr Top cover 3~ L3 L2 230V/12VAC 42VA L1 F1 T400mA F2 T3,15 A Gr Water valve drain 230V AC Low level Ground High level 230V AC Levelprobe in Tank IIII IIII Essance pump 230V AC Fan 230V AC J1 Light 12V AC 40W Serial output Control keyboard D1 Normal open, input for remote timer Operating modes 354 SHS 28 B 7
SAUNATEC HELO HSX Steam generator HSX Operating modes HSX steam generator have two programable working modes, the TIME SETTING MODE or the CONTINOUS RUN MODE. The different runningmodes are set by a jumper on the PC-borad inside the steam generator. For setting the function proceed as following: - Disconnect the mains electricity (remove fuses or switch to OFF). Open the top cover of the steamgenerator. Set the jumper according to function.or connect the remote timing/switch device. Replace the top cover.
SAUNATEC HELO HSX Steam generator Water Supply Connect the flexible ¾”water hose (included in package) to a cold water supply, or max 65°C warm water, equipped with a manual shut off valve and with a water-pressure of min 0.2 bar and max 10 bar. Use of water with a hardness over 7°dH or containing other impurities, may reduce the lifetime of the heating elements if the steam generator is not properly emptied after use. (Also see descaling with citric acid).
SAUNATEC HELO HSX Steam generator User and Service Manual Digital Control for HELO HSX Steam generator WARNING Installation and mending must be performed by qualified personnel in the respect of all the following safety norms: DLGS N°615/96 del 12/11/96 (ECC Document 89/336 on Electromagnetic compatibility) DLGS N°626/96 del 26/11/96 (ECC Document 93/68 on Low Voltage) The present manual is addressed to technical personnel qualified for installation PRODUCT DESCRIPTION The “HSX DIGITAL CONTROL PANEL” Sys
SAUNATEC HELO HSX Steam generator HELO HSX DIGITAL CONTROL CONNECTION DIAGRAM 230/12VAC 42VA TRANSFORMER INPUT MAIN POWER SUPPLY (230VAC) SENSIBILITY TRIMMER LOW LEVEL SENSOR INPUT HIGH LEVEL SENSOR INPUT OUTPUT POWER SUPPLY TO TRANSFORMER (230VAC) DELAY TRIMMER HEATER OUTPUT (230VAC) INPUT VOLTAGE (12 VAC) FROM TRANSFORMER BOILER FILLING ELECTROVALVE (230VAC) BOILER EMPTYING ELECTROVALVE (230VAC) ESSENCE OUTPUT PUMP (230VAC) FAN OUTPUT (230VAC) LAMP OUTPUT (12VAC 40W) 4 SERIAL OUTPUT GOVERNING THE
SAUNATEC HELO HSX Steam generator KEYBOARD DESCRIPTION 4 digit LED display on/off steam bath key with led on/off lamp key with led on/off fan key with led on/off essence pump key with led time key temperature key Plus key Minus key Memory1 key with led Memory2 key with led Memory3 key with led Memory4 key with led OPERATIONS Operative Options The heater can either work in the continuous running mode (A) or with the time setting program (B).
SAUNATEC HELO HSX Steam generator STEAM BATH FUNCTION . Temperature and Time setting The temperature set by default is 45°C and it can be changed from 30°C to 50°C with steps of 1°C by using the plus and minus key. The temperature can be changed also after the set steam bath program has started, by pressing the temperature key and subsequently the plus and minus keys within 2 seconds. Time can be changed by using the time key and the plus and minus keys.
SAUNATEC HELO HSX Steam generator DRAIN VALVE (Optional) Drain valve is easy to mount: screw on the magnetic valve and plug-in the cable. MAINTENANCE OF THE HELO HSX-GENERATOR The HELO HSX-generator has an automatic clean and flush feature which drains and flushes the tank after every bathing session (Requires the optional Drain valve). This will improve the life length of the steam generator but it is not a substitute for the periodic descaling (see instructions) in areas with hard water.
SAUNATEC HELO HSX Steam generator DESCALING INSTRUCTIONS. The descale procedure with the HELO HSX-steam generator is easy to carry out. Use only the recommended citric acid according to the instruction beneath. Helo HSX-steam generators are supplied with a plugged descale access pipe for filling the tank with the mixture. Descale instructions step-by-step. 1. 2. 3. 4. Add 50g of citric acid into 1 liter of fresh water and mix well.
SAUNATEC HELO HSX Steam generator Saunatec HELO HSX Steam generator Split Kit 2 Split Kit 3 Split Kit 4 Split kit user and mounting instruction Read Instructions carefully before fitting NOTE: All plumbing and electrical installation work may be carried out by authorized personnel only and in accordance with local installation and wiring regulations. SPLIT KIT 1, 2, 3 with adjustable drain cycle.
SAUNATEC HELO HSX Steam generator Mounting the Split kit: 1. Remove the short plastic-end cover and the metallic top cover from the HSX steam-generator. 2. Open the 19mm diameter predrilled hole on the inside of the shorter plastic-end cover of the HSX-steam generators. 3. Mount the Split-kit cable and strain relief to the opened hole in the plastic end cover pre-drilled holes. 21mm 21mm 19mm/Split-Kit 1 1. 2./ 3. 4.
SAUNATEC HELO HSX Steam generator HSX Flowchart Start Press pushbutton RL1 engages -check power supply -check relay -Tank is allready filled with water NO YES Solenoid Valve opens Water into tank (appr.1min 20sek) NO -check watersupply -check solenoid valve -check wiring -check waterlevel probe NO -check waterlevel probe YES LD1 on YES Water tank is full. NO YES RL5 engages NO NO YES Heating element activates YES Boiling off water in the Tank.
