User guide

SAUNATEC HELO HSX Steam generator
8
IIII
IIII
J1
Low level
High level
Ground
1 2 3 4
on
Continuos run
mode
.
Timesetting
mode
.
onoff
Remote timing
mode.
HSX Operating modes
HSX steam generator have two programable working modes,
the TIME SETTING MODE or the CONTINOUS RUN MODE.
The different runningmodes are set by a jumper on the PC-borad inside the steam generator.
For setting the function proceed as following:
- Disconnect the mains electricity (remove fuses or switch to OFF).
- Open the top cover of the steamgenerator.
- Set the jumper according to function.or connect the remote timing/switch device.
- Replace the top cover.
- Activate the fuses.
Operative Options:
1. Continous Run Mode: Jumper in ON position
2. Time Programming Mode: Jumper in OFF position
3. Remote Timing Mode: Jumper in ON position AND remote timing/switch device
connected to screw connector.
For detailed using instructions see USER GUIDE.