User guide

SAUNATEC HELO HSX Steam generator
9
Water Supply
Connect the flexible ¾”water hose (included in package) to a cold water supply, or max 65
°C warm
water, equipped with a manual shut off valve and with a water-pressure of min 0.2 bar and max 10
bar. Use of water with a hardness over 7
°dH or containing other impurities, may reduce the lifetime
of the heating elements if the steam generator is not properly emptied after use. (Also see descaling
with citric acid).
The warranty is not valid if the steam unit has been installed or used otherwise than stated in this
manual. Functional failures caused by hard or impure water are not covered by the warranty.
52
38
1
6
Drain-
outlet
Over pressure
valve
Plug-connection
for drain-valve
(extra option)
Steam-outlet
connection
Control-panel inlet
Mains electricity in
O
p
tional device inlet
Main
switch
Water
inlet