Installation manual

48
15.5 Control panel
15.5.1 Main PCB
A
1
9
A
8
7
6
A
2
3
4
A
5
B
Legend
1 Hydraulic harness connector
2 Combustion harness connector
3 Main PCB harness connector
4 Ignition module harness connector
5 Pump harness connector
6 Power supply cable
7 Electrical box
8 Main PCB
9 Casing
A Casing retaining clips
B Main PCB retaining clips
Remove the casing (9) using the
retaining clips (A).
Disconnect connectors (1) (2) (3) (4) (5)
from the main PCB.
Disconnect the power supply cable
connector (6).
Remove the main PCB (8) from the
clips (B) on the electrical box (7).
Fit the new main PCB by repeating the
operations in reverse.
•
•
•
•
•
15.5.2 User interface PCB
2
1
3
4
Legend
1 User interface retaining clips
2 Main PCB harness
3 User interface PCB
4 User interface retaining screws
Push on the 2 retaining clips (1) to
release the user interface.
Disconnect the main PCB harness (2).
Remove the user interface PCB
retaining screws (4).
Remove the user interface PCB (3).
Fit the new user interface PCB by
repeating the operations in reverse.
•
•
•
•
•