Technical information

50
13.13 Heating Flow Thermistor
For access, refer to section 13.1.
Refer to diagram 13.7.
Remove the electrical connections from the
thermistor.
Remove the retaining clip from the flow pipe.
Remove the thermistor from the retaining clip.
NOTE: that the polarity of the wiring to thermistors
is unimportant.
13.14 Heating Return Thermistor
For access, refer to section 13.1.
Refer to diagram 13.7.
Remove the electrical connections from the
thermistor.
Remove the retaining clip from the flow pipe.
Remove the thermistor from the retaining clip.
NOTE: that the polarity of the wiring to thermistor
is unimportant.
13.15 Overheat Thermostat
For access, refer to section 13.1.
Refer to diagram 13.7.
Remove the electrical connections from the
overheat thermostat.
Remove the retaining clip from the flow pipe.
Remove the overheat stat from the retaining
clip.
NOTE: When fitting new thermostat, please ensure
that it is located correctly onto the flat area of the
pipe and the retaining clip is secure.
13.16 Condensate Drain
Refer to diagram 13.8.
Remove black flexible tubes from siphon
adapter.
Diagram 13.7
VENT
POINT
HEATING FLOW
THERMISTOR
HEATING
RETURN
THERMISTOR
12591
RETURN
PIPE
OVERHEAT
THERMOSTAT
FLOW
PIPE
Diagram 13.8
12613
CAP
SEAL
SIPHON
ADAPTER
CONDENSE
TRAP
FLOAT
SCREW