Adjustable Radical Face Protector Owners Guide Model 40VIZI2 and 40VIZI4 ! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
NOTICE: For your SAFETY - PLEASE read and follow all of these instructions exactly. If you have problems understanding these instructions or have questions, please call 1-866-783-3223. Caution! Read and follow these instructions EXACTLY for care and cleaning of the lenses. These lenses are made from the highest quality polycarbonate known to man WITH a Military Grade Anti Scratch Coating AND the World’s BEST Anti Fog Coating on the inside. Remember, there is NO SUCH thing as a permanent Anti Fog coating.
USING the ADJUSTABLE ADF Our advanced optical detection system monitors your welding process to ensure that your filter remains in the dark state in a wide range of arc-welding applications. Protection from harmful ultra-violet / infrared radiation is always present whether in the light or dark state. Your new filter energizes automatically as soon as the arc is struck. All models are solar powered so there are no on / off switches. The solar cell within the mask also recharges the onboard battery.
SETTING the SENSITIVITY (SENSITIVITY CONTROL KNOB) The rotary knob can be used to adjust the sensitivity to suit the welding process. GRIND MODE ADJUSTMENT (GRIND CONTROL KNOB) Turn grind mode switch on. MORE INFORMATION • This information is intended for ALL Save Phace RFP 1 (Radical Face Protector) models. • This RFP is intended as a Welding Helmet and Grinding Mask as per ANSI and CE standards for low impact protectors. • All parts on the RFP are replaceable.
HEADGEAR ASSEMBLY INSTRUCTIONS V U T Q P S 1. Right adjustable angle regulator 2. Angle adjusting shaft 3. Headgear set 4. Left adjustable angle regulator 5. Inside square washer 6. Outside square washer 7. Headband adjusting nut T U V R • Headgear has left hand and right hand parts and tightens counter clockwise.
REPLACEMENT PARTS Not all components are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, please give the Model number and parts description. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. E-Mail: savephacesupport@sfacompanies.com Tel: (866) 783-3223 Fax: (816) 891-6599 1 5 4 8 3 2 6 Item 7 Part Number 40VIZI2 1 2 3 4 Description 40VIZI4 Qty.
NOTES: 7
ONE YEAR LIMITED WARRANTY SavePhace products undergo a strict quality control inspection for workmanship, function, and safety before leaving the factory. From the date of purchase, SavePhace will warranty or repair it's products for: one (1) year on its helmet and two (2) years on its the ADF against defects in parts and workmanship. We have a general warranty claim form along with potential request of proof of purchase.
