User's Manual

Installing the SMR-410R
Savi MobileReader 410R Quick Reference Guide 5
Installing the Optical Interface Adapter
1. Verify that the reader is turned off.
2. Insert the two lower tabs of the adapter into the lower slots on the
back of the SMR-410R.
3. Place the two upper tabs into the upper slots.
4. Slide the locking mechanism towards the SMR-410R until the
closed lock symbol is completely visible.
Starting the SMR-410R
Before you can use the SMR410R you need to follow these steps:
1. Turn on the SMR-410R by pressing the yellow key on the key-
pad.
The Boot Loader menu appears and highlights the
Reboot com-
mand.
Upper tabs
9 pin RS-232
connector
AC adapter
connector
Lock
mechanism
Upper slots
Lower slots
Unlock symbol location
Lock symbol location
I
O
/