User's Manual

Installing the SMR-410R
6
2. Press enter to cold boot the SMR-410R. For further information,
see the section “Cold Booting the SMR-410R” on page 13.
Note: If after 60 seconds no key is pressed, the SMR-410R enters
Suspend Mode and the display disappears. Press to resume boot-
ing. The DOS prompt (C:) appears when the SMR-410R
finishes booting. Type G: and press enter after the DOS prompt to get to
the correct directory.
Setting the Time and Date
To set the time and date:
1. Enter the word
time at the prompt.
2. Press enter.
3. Enter the current time (HH:MM:SS) and press enter.
To type a colon on the keypad, press
4. Enter the word
date at the prompt.
5. Press enter.
6. Enter the current date (MM-DD-YY) and press enter.
To type a dash on the keypad, press .
Using The RFID Software, HHIM.EXE
The SMR-410R communicates with Savi Technology’s SaviTag 410 and
SealTag II. With the SMR-410R you can move anywhere within range
of these tags and communicate with them.
f
Can Not Resume
Please Reboot
Boot Loader
Reboot
Password
Dump
Load
Resume
Storage
Off
I
O
/
f
f
F
f
f
H