User's Manual
Table Of Contents
3UHSDULQJWKH6LWH
(FKR3RLQW6LJQSRVW,QVWDOODWLRQ*XLGH
3UHSDULQJWKH6LWH
Mounting a Signpost requires no specific site preparation. The criteria
for placement and the preparation include the considerations listed in
Table 2-2.
7DEOH 6LWH3UHSDUDWLRQ&RQVLGHUDWLRQV
Consideration Addressed by ...
Safety
Avoid selecting a Signpost installation location where
harm to the equipment or personnel is possible.
Power
Select an installation location where power is
accessible.
Space
Allow sufficient space to install the Signpost.
Coverage
Make sure that the installation location is appropriate
for capturing data.
Model SP-600-201 Signpost coverage is a rectangle
with rounded corners that is approximately 12 feet
by 10 feet, measured on the floor under the Signpost
antenna.
Model SP-600-101 Signpost coverage is a circle that
is approximately 6 feet in diameter.
Note: The exact size and shape of these patterns is
dependent on several parameters, such as initial power
settings during installation, ambient noise levels, and
nearby obstructions. When installing, you need to
experiment to determine actual performance based on
needs.
Placement
Signposts should be placed adjacent to a portal or other
choke point, covering an area where the assets must
pass or be stored.