User's Manual
Table Of Contents
6LJQSRVW6\QFKURQL]DWLRQ
(FKR3RLQW6LJQSRVW,QVWDOODWLRQ*XLGH
6LJQSRVW6\QFKURQL]DWLRQ
For a transmit group to work, the Sync cable must be connected
between the Signposts. These optional cables are available from
Savi Technology in variable lengths.
» To cable a Signpost for synchronization:
1. Connect the female end of the cable to the Sync In connector
of the Signpost.
2. Connect the male end of the cable to the Sync Out connector
of another Signpost in the synchronized group.
3. Create group number assignments.
See “Configuring Signpost Operation Settings” on page 3-3.