User's Manual
Table Of Contents
&+$37(5
60533RG6SHFLILFDWLRQV
6DYL0RELOH5HDGHU60533RG4XLFN5HIHUHQFH*XLGH
60533RG&RPPXQLFDWLRQ
The SMR-650P Pod has both UHF and low frequency transmitters that
communicate with all Savi RFID tags via the integrated antenna. The UHF
transmitter sends commands and write information to these Savi RFID tags.
When in UHF mode, this mobile reader will support two modes of
collection: single and continuous mode.
When your mobile reader is in single UHF mode, you can only perform one
tag collection within your radius. When your mobile reader is in continuous
UHF mode, you can perform multiple tag collections while moving through
a facility.
You would use the LF transmitter to put ST-654 tags to sleep mode to
prevent unwanted interrogations (performed when the SMR-650P Pod is in
UHF) and to preserve tag battery life.
SMM.cab is a Savi-provided software that must be loaded onto your
Symbol 8100 or 8146 handheld. It works in conjunction with the handheld
and SMR-650P Pod and displays the tag information for tags that have been
interrogated, collected, or scanned. Tags are interrogated when the SMR-
650P Pod is in UHF mode, collected when the SMR-650P Pod is in UHF or
LF mode, and scanned when SMR-650P Pod is in LF mode.
Through the Symbol handheld, SMM.cab interfaces with the wireless and
wired LAN to allow you to download and upload information to and from
the database.
60533RGZLWK6\PERO
DQG
The SMR-650P Pod is compatible with the Symbol 8100 and 8146
handheld, which are Windows Pocket PC devices with two keyboard
options: 37 and 47 alphanumeric keyboards. The Symbol 8100 and 8146
handhelds feature a backlight for the keypad.
The following Symbol 8100 and 8146 models are compatible with the
SMR-650P Pod:
◆ PDT-8100-B2A94000
◆ PDT-8100-J4BA3000