User's Manual
Table Of Contents
- Savi Fixed Reader SR-650-101
- Installation Guide
- Contents
- Introduction
- Savi Fixed Reader SR-650-101 Installation
- Maintenance
Applying Power to the Savi Fixed Reader
Savi Fixed Reader SR-650 Installation Guide 19
Applying Power to the Savi Fixed
Reader
After connecting power and network cables, apply power to the Savi Fixed
Reader by connecting the male connector end of the power cable to the
appropriate power source, such as the Savi Solar Power Module or an AC
outlet.
Figure 2-4 Savi Fixed Reader SR-650-101 LED display panel
To confirm that power is present in the Reader:
1. Observe the indicators and the seven-segment display on the LED
display panel. The power indicator should be illuminated whenever
power is present.
a. During the initial power-on sequence, the Savi Fixed Reader displays
its identification number (ID) in the LED
display as a sequence of
five digits.
Savi Fixed Reader ID number 1234 displays the numbers 0, then 1,
then 2, then 3, and then 4 in sequence during the initialization
process.