User's Manual
Table Of Contents
- Savi Fixed Reader SR-650-101
- Installation Guide
- Contents
- Introduction
- Savi Fixed Reader SR-650-101 Installation
- Maintenance
CHAPTER 2
Savi Fixed Reader SR-650-101 Installation
28
You see a blank Command Prompt - telnet window if the telnet
connection is successful.
Now you can run commands to modify the properties of the reader.
To view existing reader properties:
1. At the cursor, type description and press Enter.
The current properties of the reader appear that you can view or modify.
Not all properties can be modified.
Figure 2-14 Description of reader properties
2. At the cursor, type udap? and press Enter to display the UDAP
firmware’s value.
The property udap is a read-only property; you cannot modify it.