User's Manual

Setting Up the Savi Fixed Reader SR-650-101
Savi Fixed Reader SR-650 Installation Guide 29
Figure 2-15 Telnet UDAP value display
To assign a new local IP address to the reader and modify gateway and
netmask addresses:
1. At the cursor, type localip=10.7.20.118 (or whatever valid IP address
you want to assign) and press Enter to set the reader IP address to the
input one.
Figure 2-16 Telnet local IP address display
2. Type reset and press Enter to cause the IP address to take effect.
Now you can use Telnet to connect to the reader at the new IP address.
3. Type gateway=10.100.4.1 (or whatever valid IP address you want to
assign) and press Enter to set the reader gateway IP address to the input
one.