User's Manual

CHAPTER 2 Savi Fixed Reader SR-650-101 Installation
30
Figure 2-17 Telnet Gateway IP address display
4. Type reset and press Enter to make the gateway IP address take effect.
5. Type hostip=10.7.20.18 (or whatever valid IP address you want to
assign to the SmartChain Site Manager) and press Enter to set the
reader host IP address to the input one. This will point the Savi Fixed
Reader SR-650-101 to the Site Manager’s IP address.
Figure 2-18 Telnet Host IP address display
6. Type reset and press Enter to apply the host IP address.
The host is the computer to which the reader sends the event data.
7. Type netmask=255.255.128.0 (or whatever valid mask you want to
assign) and press Enter to set the reader network mask to the input one
as depicted in
Figure 2-19.