User's Manual

Setting Up the Savi Fixed Reader SR-650-101
Savi Fixed Reader SR-650 Installation Guide 31
Figure 2-19 Telnet network mask display
8. Type reset and press Enter to make the netmask take effect.
9. Type ntpserverip=10.7.20.18 (or whatever valid NTP address you want
to assign) and press Enter to set the NTP server IP address that the
reader will listen to.
Figure 2-20 Telnet NTP server IP address display
To set reader parameters:
1. Type combinetime=ENABLE (DISABLE) and press Enter to enable
(disable) the time of event data from the reader to combine with the time
of the tag received from the Signpost.