User's Manual

Appendix A
52 Savi Fixed Reader SR-650-101 Installation Guide
Figure A-16 Telnet NTP server IP address display
To set reader parameters:
1. Type combinetime=ENABLE (or type combinetime=DISABLE), and press
Enter to enable (or disable) the time of event data from the reader to
combine with the time of the tag received from the Signpost.
Figure A-17 Telnet combine time command
2. Type ntpsynchro=ENABLE (or type ntpsynchro=DISABLE), and press
Enter to enable (or disable) the reader time and date to synchronize with
the NTP server.
Figure A-18 Telnet NTP server synchronization command