User's Manual

Configuring the Reader with Savi Retriever Using a SaviNet Connection (RS-485)
Savi Fixed Reader SR-650-101 Installation Guide 33
Configuring the Reader with
Savi Retriever Using a SaviNet
Connection (RS-485)
A Savi Fixed Reader SR-650-101 that is connected to a Savi Retriever
through SaviNet connection (RS-485) requires updating the network.
Use the Network Menu commands to check or update the network.
Figure 3-2 Savi Retriever main window
1. To open this window, right-click the icon of the host computer in the
Reader Network area.
2. Click Check Status to verify the computer status.
3. Click Verify Networks to verify the operation of the network.
4. Click Update Networks to find new readers and update the network.
The results of these commands appear in the System Status area.
Note: The update network event happens automatically only when you
first install the system. After that, make sure you update the network
whenever you attach a new Savi Fixed Reader SR-650-101.