User Manual
&+$37(5
,QVWDOOLQJ6DYL7DJ67
)LJXUH 'LUW\JUHDV\PRXQWORFDWLRQ
This demonstration was performed at about 50 degrees Fahrenheit on a
mounting surface covered with moisture and condensation. The optimum
mounting surface temperature for PST application is 60 degrees Fahrenheit
or above. At this temperature full adhesion strength will be achieved within
a few hours. But 3M has successfully applied PST to exposed surfaces
at temperatures as low as 40 degrees Fahrenheit. Even at these lower
temperatures, tags can be installed immediately after PST application;
full adhesion strength will be achieved within 24 hours.
Make sure you have the following cleaning materials available:
◆ General purpose cleaner. Any commercial cleaner with a degreaser;
for example Formula 409® Cleaner, Ajax® All-Purpose Cleaner,
or Simple Green® All-Purpose Industrial Degreaser
◆ Rags or paper towels
◆ Scrub brush, bucket, and mild soap and water solution if needed