User Manual

0RXQWLQJ6DYL7DJ67
6DYL7DJ67,QVWDOODWLRQ*XLGH 
$SSO\LQJWKH7DJ
 Return to the location
where the mounting sleeve
or tag is to be attached to
the shipping container or
asset.
 Obtain a mounting sleeve
with PST installed and
carefully remove the red
protective film covering.
Avoid touching the PST
adhesive. You can also
apply PST directly to the
back of a tag that is to be
mounted without a sleeve.
 Position the sleeve, making
sure the retaining clip is
pointed up. Make sure there
is at least 4 inches (10 cm)
of vertical clearance above
the ST-654 sleeve to allow
the ST-654 tag to be
inserted. Be sure that the
surface to which you will
apply the tape is flat, and
that the sleeve or tag can
move freely to compress
the tape in the next step.