User Manual

0RXQWLQJ6DYL7DJ67
6DYL7DJ67,QVWDOODWLRQ*XLGH 
0RXQWLQJ6DYL7DJ678VLQJ5LYHWV
1RWH ,I\RXZDQWWRPRXQW6DYL7DJ67XVLQJULYHWVFRQVLGHU
UHPRYLQJWKH367DVRXWOLQHGLQ´5HPRYLQJ3UHVVXUH6HQVLWLYH7DSH
0RXQWHG6OHHYHVRU7DJVµRQSDJH

Determine where the mounting sleeve or SaviTag ST-654 is to be
attached to the shipping container or asset. Make sure there is at least
4 inches (10 cm) of vertical clearance above SaviTag ST-654 mounting
sleeve to allow the tag to be inserted.
 Using a marker, mark on the shipping container or asset the location
of the rivet holes on the tag mounting sleeve.
 On the shipping container, drill holes at the locations you marked
in step 2.
 Return to the location where the mounting sleeve or tag is to be attached
to the shipping container or asset. Align the rivet holes on the tag
mounting sleeve with the rivet holes you made in step 3.
 Push the head of the rivets through the tag mounting sleeve.
)LJ X UH  ,Q VHU WULYHWV
 Use the handheld rivet gun to clip the nail of the rivet and secure the
tag mounting sleeve to the shipping container or asset. Avoid fastening
the rivets too tightly so as not to damage the mounting sleeve.
,QVHUWULYHWKHUH
,QVHUWULYHWKHUH