User's Manual
Installation Guide For
Savi-EJ Brooks Re-Usable eSeal ST-662
Page 1 of 3 pages ELECTRONIC COPY
NOT CONTROLLED IF PRINTED
Date Prepared Revision Revision Date Revision Approval
Feb 24, 2006
1.0
Feb 24, 2006 K. Merritt
Savi-EJB Installation Guide - ST-662.doc
Savi-EJ Brooks Re-Usable eSeal ST-662
Installation Guide
The EJ Brooks Re-Usable Electronic eSeal ST-662 consists of a printed circuit board incorporating a
non-replaceable battery enclosed in a sealed plastic case with a fixed bolt designed for single insertion.
Once the bolt is inserted in the housing, it is locked in place, and cannot be removed without destroying
the unit.
• The Savi-EJ Brooks ST-662 tag contains a label on the front with the tag serial number in
both bar code and numerical format and includes the product model number. The label also
includes FCC compliance markings.
• The Savi-EJ Brooks ST-662 tag can be exposed to environments including rain, snow, and
direct exposure to sunlight.
• The tag battery life is a nominal 4 years under normal operating conditions. The tag contains
an internal lithium battery and should be discarded according to local safety requirements.