Installation Guide Savi SensorTag ST-674 Version 1.
Published March 2006 Part number 805-05264-001 Rev A Documentation for Savi SensorTag ST-674, version 1.0 Copyright © 2006 Savi Technology, Inc. All rights reserved. Information in this manual is subject to change without notice and does not represent a commitment from the vendor. The software and/or databases described in this document are furnished under a license agreement or nondisclosure agreement. The software and/or databases may be used or copied only in accordance with the terms of the agreement.
Contents 1 About the Savi SensorTag ST-674 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tag Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Environmental Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 RFID Communication Module . . . . . . . . . . . . . . . . . . . . . . . . . 6 For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Guides to Read .
Savi SensorTag ST-674 Installation Guide
CHAPTER 1 About the Savi SensorTag 1 ST-674 The Savi® SensorTag ST-674 is a high-performance, active RFID tag that tracks assets and monitors and logs the temperature and relative humidity of its surrounding environment, such as inside a warehouse, box, or container. Fully compatible with Savi software and fixed and portable Savi readers, this tag features omnidirectional line-of-sight communication. Battery life, using lithium cells, is typically four years (depending on the type of operation).
CHAPTER 1 About the Savi SensorTag ST-674 Tag Description The temperature sensor inside the tag gauges the surrounding environment’s temperature when air passes through this vent Environmental Sensors The environmental sensors monitor and record the temperature and humidity of the tag’s surrounding area at user-specified times in an environmental log. You can set maximum and minimum temperature and humidity threshold.
For More Information For More Information Guides to Read For information about using: ◆ Signposts, see the Savi Signpost SP-65X Series Installation Guide. ◆ Fixed readers, see the Savi Fixed Reader SR-650-101 Installation Guide. ◆ Mobile readers, see the Savi Mobile Reader SMR-650 for the Intermec 751G/A Mobile Computer and PC User Guide. ◆ Mobile device software, see the Guide to Savi SmartChain for Mobile Devices and Guide to Savi Transportation Security System for Mobile Devices.
CHAPTER 8 1 About the Savi SensorTag ST-674 Savi SensorTag ST-674 Installation Guide
CHAPTER Installing the Tag 2 2 Required Tools and Materials Before you begin installation of the Savi SensorTag ST-674, make sure you have the following materials available: ◆ Savi SensorTag ST-674 ◆ Savi SmartChain for Mobile Devices installed on an Intermec 751G/A mobile computer with an attached Savi Mobile Reader SMR-650-212 Commissioning a Tag Savi SensorTag ST-674 is shipped from the factory in sleep mode.
CHAPTER 2 Installing the Tag Commissioning the Tag with a Tag Write Cable or Tag Write Cable Adapter 1. Connect Savi Tag Write Cable STA-1030 or Savi Tag Write Cable Adapter STA-1031 to an available serial port on the host computer. 2. Locate the tag commissioning port on the tag. 3. Unplug the rubber cap covering the port. 4. Insert Savi Tag Write Cable STA-1030 or Savi Tag Write Cable Adapter STA-1031, with the LED up, into the tag commissioning port. Start the tag commissioning application.
Commissioning a Tag Commissioning the Tag with a Savi Docking Station and Docking Station Adapter 1. With the Savi EchoPoint label right-side up, insert the adapter into the docking station until the adapter stops. The adapter has a magnetic contact that adheres to the Savi Docking Station SDS-2002 when fully inserted. 2. Unplug the rubber cap covering the write port on the tag and ensure that the Savi EchoPoint label on the tag is upside down. Note the lit Contact LED on the docking station.
CHAPTER 2 Installing the Tag Replacing the Main Battery Savi SensorTag ST-674 is equipped with non-volatile memory and contains a backup battery to maintain the real-time clock that is not replaceable. To conserve battery life of the backup battery, refer to Guide to Savi SmartChain for Mobile Devices to turn off the UHF transceiver and return the tag to sleep mode when the tag is in storage. 1. Turn the battery cover counterclockwise. When removing the battery cover, hold on to it to avoid dropping it.
