User's Manual

Features
7
Features
• ISO 18000-7 compliant active RFID tag with environmental sensor
capability
• Sensors monitor security status and environmental conditions inside
shi
pping container
• Unique C-clamp, door-mounted design
• Supports low frequency technology for more precise locating
capabilit
ies
• FCC, HERO, ETSI, RoHS (Directive 2002/95/EC) certified
Activating the Tag
The tag is shipped in sleep mode. You must remove and re-insert the
battery to wake up the tag. After you re-insert the battery, you can
initialize the tag.
1. Remove the battery cap.
Turn to open
Remove battery as shipped
2. Remove the battery. Wait a few seconds and then reinsert the battery,
matching the negative (–) and positive (+) terminals to the symbols
shown on the tag housing. The tag will not work if you install the
battery in the wrong direction (reversed).