User's Manual

Correct battery orientation
Turn to open
Correct battery orientation
Savi ST-675 Container Security Tag Installation Guide
8
Whenever a battery is inserted into a tag, the tag will emit 5 beeps.
Then, if the tag emits a long (1/2 se
cond beep), that means it has an
internal sensor failure.
Then, the tag will emit 2 short beeps to indicate adequate battery
voltage or 3
short beeps if a fresh battery is required.
Whenever a battery is inserted into a t
ag, the tag assumes that it is a
fresh battery. Inserting a used battery into a tag may result in what
appears to be a premature battery failure.
3. Replace the battery cap on the tag. Continue tightening the cap until
it is secure.