User Manual

CHAPTER 2 Installing Savi ST-656-I ISO Container Door Tag
10 Savi ST-656-I ISO Container Door Tag Installation Guide
1. Connect SaviTag Write Cable STA-1030 to an available serial port on
the host computer.
2. Locate the tag
commissioning port on
the Savi ST-656-I ISO
Container Door Tag.
3. Unplug the rubber cap
covering the port.
4. Insert SaviTag Write Cable
STA-1030, with the LED
up, into the Savi ST-656-I
ISO Container Door Tag
commissioning port. Start
the tag commissioning
application. The LED is lit
when the application writes
data to the tag.
Port
LED
visible