Savin 2555 Operating Instructions COPY REFERENCE Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual.
6. User Tools (Copy/ Document Server Features) Accessing the User Tools (Copy/ Document Server Features) This section is for the key operators in charge of this machine. You can change or set the machine's default settings. Preparation After using the User Tools, be sure to exit from the User Tools. The selected key is highlighted. Any changes you make with the User Tools remain in effect even if the main power switch or operation switch is turned off, or the {Clear Modes/Energy Saver} key is pressed.
User Tools (Copy/Document Server Features) C Select the desired menu and press the key. Note ❒ [TNext]: Press to go to the next page. ❒ [UPrev.]: Press to go back to the previous page. Reference ⇒ P.308 “User Tools Menu (Copy/Document Server Features)”. D Change the settings by following the instructions on the display panel. Then press the [OK] key. 6 Reference ⇒ P.310 “Settings You Can Change with the User Tools”. Note ❒ [OK]: Press to set the new settings and return to the previous menu.
Accessing the User Tools (Copy/Document Server Features) 6 This page is intentionally blank.
User Tools (Copy/Document Server Features) User Tools Menu (Copy/Document Server Features) General Features Prev. Key Next Key Page Format 6 Prev. Key Next Key Reproduction Ratio Prev. Key Next Key Page Numbering Prev. Key Prev.
User Tools Menu (Copy/Document Server Features) Count Manager Input / Output Stamp Setting Background Numbering 6 Preset Stamp Prev. Key Prev. Key Next Key Prev.
User Tools (Copy/Document Server Features) Settings You Can Change with the User Tools Reference For how to access the User Tools, see ⇒ P.305 “Accessing the User Tools (Copy/ Document Server Features)”. General Features 1/3 Menu Description Auto Paper Select Priority As a default setting, Auto Paper Select is selected. You can cancel this setting. Note ❒ Default: Yes Auto Paper Select Tray Display 6 You can choose whether the available paper trays/sizes are shown on the initial display.
Settings You Can Change with the User Tools Menu Description Original Mode Display You can choose whether the original modes are shown on the initial display. Note ❒ Default: No ❒ If you choose “Yes”, the display is shown as below. Original Mode Quality Level You can adjust the quality level of copies for each of the original types (Text, Text·Photo, Photo, Pale, Generation). 6 Text Adjust the sharpness of text. Note ❒ Default: Normal ❒ [SP Mode Changed] is the value set during service setup.
User Tools (Copy/Document Server Features) Menu Description Photo For a photo original, adjust the finish quality level to match the type of photo original. Note ❒ Default: Screened Printed ❒ [SP Mode Changed] is the value set during service setup. ❒ Select [Screened Printed] for printed photo originals, and [Continuous Tone] for printed photo originals with fine dots. ❒ Select [Normal] for printed photo and text originals.
Settings You Can Change with the User Tools General Features 2/3 Menu Description Duplex Mode Prior- You can select the type of the Duplex function effective when ity the machine is turned on, Energy Saver mode is off, or Auto Reset is on. Note ❒ Default: • Metric version: 1 Sided→1 Sided • Inch version: 1 Sided→2 Sided Copy Orientation in You can set the copy orientation when making two-sided copDuplex Mode ies.
User Tools (Copy/Document Server Features) Menu Description Job End Call You can choose whether or not the beeper sounds when copying is complete, when copying is interrupted, when the paper tray runs out of paper, or when there is a paper jam. Note ❒ Default: On ❒ When the “Auto Response (Human) Sensor” of the User Tools (System Settings) setting is set to “Yes” and the machine senses that there is a person present, it judges that copying operations are not complete and the beeper does not sound.
Settings You Can Change with the User Tools Reproduction Ratio 1/2 Menu Description Shortcut R/E You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display. You can also change the registered Reduce/Enlarge ratios. If no Reduce/Enlarge ratio has been set when selecting [User Ratio 1], [User Ratio 2], or [User Ratio 3], enter the desired Reduce/ Enlarge ratio using the number keys.
User Tools (Copy/Document Server Features) Menu Description Priority Setting : En- You can set the ratio with priority when the [Reduce/Enlarge] key large is pressed, followed by the [Enlarge] key. Note ❒ Default: • Metric version: 141% • Inch version: 155% Reproduction Ratio 2/2 Menu Description Reduce 1 You can customize the reduction ratios available when you press the [Reduce/Enlarge] key followed by the [Reduce] key.
Settings You Can Change with the User Tools Menu Description Shrink&Center Ratio You can set a Reduce/Enlarge ratio when registering “Shrink&Center” in a Shortcut Key. Note ❒ Default: 93% Page Format 1/2 Menu Description Front Margin: Left/ You can specify left and right margins on the front side of copies Right in Margin Adjust mode. Note ❒ Default: • Metric version: Left 5mm • Inch version: Left 0.
User Tools (Copy/Document Server Features) Menu Description 1 → 2 Duplex Auto Margin Adjust In 1 sided →2 sided Duplex mode, you can specify whether to automatically set the margins on the back side. The margin is set to the same value of “Back Margin: Left/ Right”. Note ❒ Default: Yes Erase Border The default setting of the width of the erased margins in Erase Border mode can be changed as follows: • Metric version: 3 – 50mm in 1mm steps • Inch version: 0.1" – 2.0" in 0.
Settings You Can Change with the User Tools Menu Description Repeat Separation Line You can select a separation line in Image Repeat mode from no line, Solid line, Broken line 1, Broken line 2, or Crop.
User Tools (Copy/Document Server Features) Page Format 2/2 Menu Description Double Copies Sep- You can select a separation line in Double Copy mode from no aration Line line, Solid line, Broken line, or Crop.
Settings You Can Change with the User Tools Menu Description Combine Separation Line You can select a separation line in Combine mode from no line, Solid line, Broken line 1, Broken line 2, or Crop. • None • Solid • Broken 1 • Broken 2 6 • Crop Note ❒ Default: None Copy Back Cover When copying the back cover, you can specify whether to issue the back cover outside (outside page) or inside (inside page).
User Tools (Copy/Document Server Features) Menu Description Booklet/Magazine Original Orientation You can select the type of originals for Booklet or Magazine mode. Copy Order In Combine Mode You can set the copy order in Combine mode to “Left to Right” or “Top to Bottom”.
Settings You Can Change with the User Tools Stamp Setting Background Numbering Menu Description Size You can set the size of the numbers. Note ❒ Default: Normal • Small: About 8 × 4mm, 0.32" × 0.16" • Normal: About 32 × 16mm, 1.28" × 0.64" • Large: About 64 × 32mm, 2.56" × 1.28" Density You can set the density of the numbers. Note ❒ Default: Normal Superimpose You can select whether the numbering is printed negative when it overlaps black parts of the image.
User Tools (Copy/Document Server Features) Menu Description Stamp position You can set the position at which the stamp is printed. Press the arrow keys to adjust the position. Note ❒ Default: • Metric Version: • Position: Top Right • Top/Bottom Margin: 24mm • Left/Right Margin: 24mm • Inch Version: • Position: Top Right • Top/Bottom Margin: 0.9" • Left/Right Margin: 0.9" Stamp condition You can adjust the size, density and print page for the stamp. Size 6 You can set the size of the stamp.
Settings You Can Change with the User Tools User Stamp Menu Description Program/Delete Stamp You can register up to 4 custom stamps with your favorite design. You can register/ change/delete your favorite design as a user stamp. How to Program/Delete Stamp, see ⇒ P.189 “Program/Delete User Stamp”. Stamp position You can set the position at which the stamp is printed. Press the arrow keys to adjust the position.
User Tools (Copy/Document Server Features) Menu Description Font You can select the Date Stamp font. Note ❒ Default: Font 1 ❒ This setting is linked with Page Numbering. Position Priority You can set the position at which the stamp is printed. Press the arrow keys to adjust the position. Note ❒ Default: • Metric version: • Position: Top Left • Top/Bottom Margin: 8mm • Left/Right Margin: 32mm • Inch version: • Position: Top Left • Top/Bottom Margin: 0.3" 6 • Left/Right Margin: 0.
Settings You Can Change with the User Tools Menu Description Font You can select the font of the page number that is printed in Page Numbering mode. Note ❒ Default: Font 1 ❒ This setting is linked with Date Stamp. Size You can set the size of the stamp that is printed in Page Numbering mode. Note ❒ Default: Auto Select ❒ This setting is linked with Date Stamp. Duplex Back Page Number Position You can set the position of the duplex back page number that is printed in Duplex mode.
User Tools (Copy/Document Server Features) Menu Description Superimpose You can select whether page numbers are printed negative when they overlap black parts of the image. Note ❒ Default: Off ❒ This setting is linked with Date Stamp.
Settings You Can Change with the User Tools Input/Output Menu Description Batch (SADF) Auto Reset Time When you set one original at a time in the document feeder, the Auto Feed indicator lights for a selected time after an original is fed to show that the document feeder is ready for another original. You can adjust this time from 3 seconds to 99. Note ❒ Default: 10sec. ARDF Original Table Rise Time You can set the document feeder original table rise time.
User Tools (Copy/Document Server Features) Menu Description Auto Sort Mode You can specify whether Sort mode is selected when the machine is turned on or the mode is cleared. Note ❒ Default: No Memory Full Auto Scan When the memory becomes full while scanning originals, Restart the machine can make copies of the scanned originals first, then automatically proceed scanning the remaining originals. You can enable or disable this function.
Settings You Can Change with the User Tools Count Manager When a key operator code has already been entered, you cannot begin manager settings unless you enter the key operator code (up to 8 digits). Menu Description Check/Reset/Print Copy Counter You can check or print the number of copies made under each user code. You can also reset each user code's counter to 0. If more than 10 user codes are registered, you can view all the counters using the [UPrev.] or [TNext] key.
User Tools (Copy/Document Server Features) Menu Description Face-Up/Down Selection in Bypass Mode You can set whether copies are delivered face up or face down when making copies from the bypass tray. Limitation ❒ Only use “Face Down Exit” when copying onto standard high quality paper with a weight of 52 – 105g/m2 (14 – 28 lb. Bond). ❒ When you select “OHP” or “Thick Paper”, copy paper is delivered face up even if you have set the “Face-Up/ Down Selection in Bypass Mode” setting to “Face Down Exit”.
7. REMARKS Do's And Don'ts R CAUTION: • Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. • When you use this equipment for a long time in a confined space without good ventilation, you may detect an odd smell. To keep the workplace comfortable, we recommend you keep it well ventilated. • Do not press areas on or around the fusing unit. These areas get hot.
REMARKS Where to Put Your Machine Machine Environment Your machine's location should be carefully chosen because environmental conditions greatly affect its performance. Optimum environmental conditions R CAUTION: • Keep the equipment away from humidity and dust. Otherwise a fire or an electric shock might occur. • Do not place the equipment on an unstable or tilted surface. If it topples over, it could cause injury.
Where to Put Your Machine Power Connection R WARNING: • Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extention cord. • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire.
REMARKS Access to the Machine Place the machine near the power source, providing clearance as shown. 1 4 2 3 TSPS060E 1. Rear: more than 3 cm (1.2") 2. Right: more than 4 cm (1.6") 3. Front: more than 70 cm (27.6") 4. Left: more than 10 cm (4.0") Note ❒ For the required space when options are installed, contact your service representative.
Maintaining Your Machine Maintaining Your Machine If the exposure glass or document feeder belt is dirty, you might not be able to make copies as you want. Clean them if you find them dirty. ❖ Cleaning the machine Wipe the machine with a soft, damp cloth. Then, wipe it with a dry cloth to remove the water. Important ❒ Do not use chemical cleaner or organic solvent, such as thinner or benzene. If they get into the machine or melt plastic parts, a failure might occur.
REMARKS 7 338
8.
Specification • Duplex: A3L – A5L, 11" × 17"L – 51/2" × 81/2"L (impossible on A5K, 51/2" × 81/2" K) • LCT: A4K, B5K, 81/2" × 14"K *1 , 81/2" × 11"K *1 The optional 81/2" × 14" paper size tray is required to set this size of paper. ❖ Copy paper weight: • Paper tray: 52 – 128g/m2, 14 – 34 lb. Bond • Bypass tray: 52 – 157g/m2, 14 lb. Bond – 90 lb. Index 52 – 200g/m2, 14 lb. Bond – 110 lb. Index (When the optional 100 sheet finisher is installed.
Mainframe Reduction 93% 93% 82% 85% 75% 78% 71% 73% 65% 65% 50% 50% Zoom: From 25 to 400% in 1% steps. ❖ Maximum continuous copy run: 999 sets ❖ Copy paper capacity: • Tray 1 (Tandem tray) : 3,100 sheets (1,550 sheets × 2) (80g/m2, 20 lb. Bond) • Tray 2 (550-sheet tray) : 550 sheets (80g/m2, 20 lb. Bond) • Tray 3 (550-sheet tray) : 550 sheets (80g/m2, 20 lb. Bond) • Bypass tray: 50 sheets (80g/m2, 20 lb. Bond) ❖ Power consumption: • Mainframe only Type 1 Type 2 Warm-up about 1.
Specification ❖ Space for mainframe (W × D): • 1,265 × 750mm, 49.9" × 29.6" (ADF external extender is not used. Optional Output tray is installed.) • 1,380 × 750mm, 54" × 30" (ADF external extender is used for larger size originals. Optional Output tray is installed.
Document Feeder Document Feeder ❖ Mode: ADF mode, Batch (SADF) mode, Mixed Sizes mode, Thin mode ❖ Original size: • A3L – B6KL • 11" × 17"L – 51/2" × 81/2"KL ❖ Original weight: • 1-sided originals: 52 – 157g/m2 (14 – 42 lb. Bond) • 2-sided originals: 52 – 128g/m2 (14 – 34 lb. Bond) (Duplex) • Thin original: 41 – 157g/m2 (11 – 42 lb. Bond) ❖ Number of originals to be set: 100 sheets (80g/m2, 20 lb. Bond) or less than 12mm, 0.4" Note ❒ Specifications are subject to change without notice.
Specification 50-Sheet Finisher ❖ Paper size: Proof Tray: A3L – B6L, A6L, 11" × 17"L – 51/2" × 81/2"KL Shift Tray: A3L – A5KL, 11" × 17"L – 51/2" × 81/2"KL Staple Mode: A3L – B5KL, 11" × 17"L – 81/2" × 11"KL Punch Mode: • 2 holes: A3L – A5KL, 11" × 17"L, 81/2" × 14"L – 51/2" × 81/2"KL • 3 holes: A3L, B4L, A4K, B5K, 11" × 17"L, 81/2" × 11"K • 4 holes: • Metric version: A3L, A4K, 11" × 17"L, 81/2" × 11"K • Scandinavian version: A3L – A5K, 11" × 17"L, 81/2" × 14"L – 51/2" × 81/2"K ❖ Paper weight: Stack: 52 –
50-Sheet Finisher ❖ Power consumption: 48W (power is supplied from the mainframe.) ❖ Dimensions (W × D × H): 625 × 545 × 960mm, 24.7" × 21.5 " × 37.8" ❖ Weight: Approx. 45kg, 99.3 lb Note ❒ Specifications are subject to change without notice.
Specification 100-Sheet Finisher ❖ Paper size: Proof Tray: A3L – A5KL, 11" × 17"KL – 51/2" × 81/2"KL Shift Tray: A3L – A5KL, 11" × 17"KL – 51/2" × 81/2"KL Staple Mode: A3L – B5KL, 11" × 17"L – 81/2" × 11"KL Punch Mode: • 2 holes: A3L – A5KL, 11" × 17"L, 81/2" × 14"L – 51/2" × 81/2"KL • 3 holes: A3L, B4L, A4K, B5K, 11" × 17"L, 81/2" × 11"K • 4 holes: • Metric version: A3L, A4K, 11" × 17"L, 81/2" × 11"K • Scandinavian version: A3L – A5K, 11" × 17"L, 81/2" × 14"L – 51/2" × 81/2"K ❖ Paper weight: Stack: 52 – 2
100-Sheet Finisher ❖ Dimensions (W × D × H): 800 × 728 × 980mm, 31.5" × 28.7 " × 38.6" ❖ Weight: Approx. 50kg, 130.1 lb Note ❒ Specifications are subject to change without notice.
Specification Booklet Finisher ❖ Paper size: Proof Tray: A3L – A5KL, 11" × 17"L – 51/2" × 81/2"KL Shift Tray: A3L – A5KL, 11" × 17"L – 51/2" × 81/2"KL Staple Mode: • Bottom or Top: A3L – B5K, 11" × 17"L, 81/2" × 11"KL • 2 Staples: A3L, B4L, A4K, B5K, 11" × 17"L, 81/2" × 11"L Saddle Stitch Mode: A3L – A4L, 11" × 17"L, 81/2" × 11"L ❖ Paper weight: Stack: 52 – 163g/m2, 14 – 42 lb. Bond Staple: 64 – 80g/m2, 17 – 20 lb. Bond Saddle Stitch: • 64 – 80g/m2, 17 – 20 lb. Bond • 64 – 128g/m2, 14 – 34 lb.
Booklet Finisher ❖ Dimensions (W × D × H): 689 × 603 × 1,055mm, 27.2" × 23.8 " × 41.6" ❖ Weight: Approx. 50kg, 130.1 lb Note ❒ Specifications are subject to change without notice.
Specification Punch Kit (Option) ❖ Paper size • 2 holes: A3L – A5KL, 11" × 17"L, 81/2" × 14"L – 51/2" × 81/2"KL • 3 holes: A3L, B4L, A4K, B5K, 11" × 17"L, 81/2" × 11"K • 4 holes: • Metric version: A3L, A4K, 11" × 17"L, 81/2" × 11"K • Scandinavian version: A3L – A5K, 11" × 17"L, 81/2" × 14"L – 51/2" × 81/2"K ❖ Paper weight: • 4 holes: 52 – 128g/m2, 14 – 34 lb. Bond • 2 or 3 holes: 52 – 157g/m2, 14 lb. Bond – 90 lb. Index ❖ Power consumption: 33.6 W (power is supplied from the mainframe.
Output Tray (Option) Output Tray (Option) ❖ Paper capacity: • A3, 11" × 17" : 250 sheets • B4, 81/2" × 14" : 500 sheets • A4, 81/2" × 11" : 500 sheets • B5, 51/2" × 81/2" : 250 sheets ❖ Dimensions (W × D × H): 390 × 330 × 130mm, 15.4" × 13.0" × 5.2" ❖ Weight: Approx. 650 g, 1.5 lb Note ❒ Specifications are subject to change without notice.
Specification Large Capacity Tray (LCT) (Option) ❖ Paper size: A4K, B5K, 81/2" × 14"K *1 , 81/2" × 11"K *1 The optional 81/2" × 14" paper size tray is required to set this size of paper. ❖ Paper weight: 64 – 105g/m2, 16 – 24 lb. Bond ❖ Paper capacity: 3,500 sheets (80g/m2, 20 lb. Bond) ❖ Power consumption Maximum. 48 W (power is supplied from the mainframe.) ❖ Dimensions (W × D × H, option unit): 403 × 529 × 608mm, 15.9" × 20.9" × 24.0" ❖ Weight: Approx. 22 kg, 48.
Copy Connector Cable (Option) Copy Connector Cable (Option) ❖ Continuous copying speed: With two 55 copies/minute models: • 110 copies/minute (A4L, 81/2" × 11"L) • 58 copies/minute (A3L, 11" × 17"L) With two 70 copies/minute models: • 140 copies/minute (A4K, 81/2" × 11"K) • 72 copies/minute (A3L, 11" × 17"L) With one 55 copies/minute model and one 70 copies/minute model: • 125 copies/minute (A4K, 81/2" × 11"K) • 64 copies/minute (A3L, 11" × 17"L) ❖ Dimensions (W × D × H): 310 × 310 × 65mm, 12.2" × 12.
INDEX 100-Sheet Finisher, 7, 346 50-Sheet Finisher, 7, 344 A Access to the Machine, 336 Adding Staples, 285 ADF external tray, 4, 5 ADF tray, 5 Auto Off, 30, 235 Auto Reduce/Enlarge, 47 Auto Reset, 30, 234 Auto Start, 90 B Back Cover, 151, 154 Background Numbering, 181 Basic functions, 40 Batch (SADF) mode, 36 Booklet Finisher, 7, 225, 348 Book originals, copying, 137, 140 Border Erase, 172, 173 Bypass tray, 5, 73 C Center/Border Erase, 172, 177 Center Erase, 172, 175 Centering, 179 Changing Paper Tray 2
I P Image Density, 40, 41 Image Repeat, 167 Indicators, 8 Interrupt Copy, 88 Interrupt key, 8 J Job Preset, 83 L Large Capacity Tray (LCT), 7, 352 Loading Paper, 263 Large Capacity Tray (LCT), 266 Tray 1, 263 Tray 2, 265 Tray 3, 265 M Machine Environment, 334 Mainframe, 339 Main power indicator, 8 Main power switch, 4, 17 Maintenance, 337 Margin Adjustment, 170 Master unit, 225 Messages, 247 Misfeeds, 270 Mixed Sizes mode, 37 N Numbering Background Numbering, 181 Page Numbering, 198 Number keys, 9 O O
Stamp, 181 Background Numbering, 181 Date Stamp, 194 Page Numbering, 198 Preset Stamp, 183 User Stamp, 186 Staple, 52 Staples, 285 Removing Jammed Staples, 293 Stapling copies, 60 Start key, 9 Sub-unit, 225 T Thin mode, 39 Toner, 27 Toner Bottle Changing, 268 Storage, 27 Two-sided Copies, 107, 111 U User Codes, 90 User Stamp, 186 User Tools Copy/Document Server Features, 305 Settings, 310 User Tools/Counter key, 8 V Ventilation hole, 6 Z Zoom, 97 356 UE USA A293