Instruction manual

3-1
3700R/3740 Refrigerated Sampler
Section 3 Programming Guidelines
This section discusses in detail the sampling features of the
3700R Sampler and the procedures for programming your
sampler.
Teledyne Isco has found that the most effective way to learn to
program the sampler is to read this section with a sampler in
front of you. The time that you spend in the office or laboratory
actually programming the sampler and observing its operation is
usually time well spent.
If you are already familiar with the sampling capabilities of the
3700R Sampler, you may prefer to begin with the section entitled
Programming Introduction on page 3-8. This section introduces
the specifics of programming the sampler.
• Description of Sampling Operations contains a
description of the sampling cycle, as well as the opera-
tions.
•The Types of Samples section discusses sample types
that can be taken in both basic and extended mode with
the 3700 Sampler.
•The Programming Introduction section discusses the
sampler’s program structure and introduces both basic
and extended programming modes.
•The Operating States section discusses the sampler’s
three operating states.
• Introduction to the Programming Procedures describes
the basic programming mode.
•The sections Using the Keypad to Respond to Displays,
Keypad Description, and Displays discuss programming
the sampler with the keypad.
• Basic Programming provides examples for the basic
programming mode.
•The Configure Sequence section discusses how to tailor
the sampler to your specific application.
•The Extended Programming Mode section discusses the
mode and presents programming examples.
• Foreign Languages and Metric Units of Measure
discusses adjusting the sampler for a foreign language
and or metric units.
•The Standby State section discusses your options when
the sampler is in standby.