Operating instructions

Starting the Machine
7
1
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. See “Energy Saver
Timer”, “Auto Off Timer” in the
Copy Reference.
-
--
-Power switches
This machine has two power switch-
es: See P.1 “Guide to Components”.
❖
❖❖
❖ Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖
❖❖
❖ Main power switch
Do not touch the Main Power
switch. It should be used only by a
service representative when the
optional fax unit is installed.
Important
❒ If you leave the Main Power
switch off for more than one hour,
all fax files in memory are deleted.
See “Turning Off The Power” be-
low.
Turning on the Power
A
Confirm that the power cord is
plugged into the wall outlet firm-
ly and the Main Power switch is
on.
B
Turn on the operation switch. The
On indicator should light.
The panel display will turn on.
Note
❒ If nothing happens when you
turn on the operation switch,
make sure the Main Power
switch is turned on.
Turning off the Power
A
Turn off the operation switch.
The On indicator will go out.
Important
❒ Before you unplug the power
cord, confirm that the display in
Facsimile mode indicates that the
remaining memory space is 100%.
❒ Fax files stored in memory will
be deleted an hour after you
turn the Main Power switch off
or you unplug the power cord.
Energy Saver Clear Modes
Interrupt
LTWO020E.eps
Energy Saver Clear Modes
Interrupt
LTWO020E.eps