Operating instructions

Setting Originals
13
2
-
--
-How to set A4, B4, A3, Lt, LG
and DLT size originals
-
--
-How to set A4, A5 and B5 size
originals
Limitation
❒ 5
1
/
2
"×8
1
/
2
" /A5 size on the expo-
sure glass is not detected. Set 5
1
/
2
"
×8
1
/
2
" /A5 size documents in the
ARDF.
Setting a Single Original on
the Exposure Glass
Set originals that cannot be placed in
the Document Feeder (ARDF), such
as a book, on the exposure glass one
page at a time.
A
Lift the Document Feeder (ARDF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
1. Reference mark
2. Scale
Note
❒ If you do not raise the Docu-
ment Feeder (ARDF) by at least
30 degrees, the original size will
not be detected.
B
Close the Document Feeder (AR-
DF).
Note
❒ When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from ris-
ing.
Where original is set
Exposure glass
Document Feeder(ADF)
Original
ND0X01E2
ND0X01E2.eps
Where original is set
Exposure glass
Document Feeder(ADF)
Original
ND0X01E1
ND0X01E1.eps
Zaah220e.eps