Operating instructions

Setting Originals
15
2
-
--
-Scanning in Mixed Sized
Originals
If you wish to scan in stacks of origi-
nals containing mixed paper sizes
from Document Feeder (ARDF), you
can have the machine automatically
detect the size of each originals.
Note
❒ By default this feature is turned off.
To turn it on, adjust the User Param-
eters. See Chapter6, “Changing the
User Parameters (Switch05, Bit6)”
in the Advanced Features manual.
❒ Scanning may take slightly longer
when this function is turned on.
❒ Small originals may be sent at a
slight slant if they are not stacked
flush against the Document Feeder
(ARDF) document guides.
❒ If you try and set a stack of mixed
size originals in the Document
Feeder (ARDF) with this function
turned off, a paper jam may occur.
Originals unsuitable for the Document Feeder (ARDF)
Do not set the following types of originals in the Document Feeder (ARDF) be-
cause they may be damaged. Place them on the exposure glass instead.
• Originals of sizes other than those specified in the previous table
• Originals containing staples or clips
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermosensitive paper, art paper,
aluminum foil, carbon paper, or conductive paper
• Originals with index tabs, tags, or other projecting parts
• Sticky originals, such as translucent paper
• Thin and soft originals
• Originals of inappropriate weight (see table above)
• Originals in bound form, such as books
• Transparent originals, such as OHP transparencies or translucent paper