Operating instructions

Faxing
16
2
If the machine cannot detect the size of your original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A
Press [Exit].
B
Remove the original and replace it on the exposure glass.
C
Press the {
{{
{Start}
}}
} key to scan the original again.
If the above display appears again, repeat steps A to C.
Note
❒ If the machine still cannot detect the original size, the following display is
shown: If this happens, carry out the following steps.
• Press the < or > key to switch the scan size.
• Press the {Start} key again.
Original Sizes Difficult to Detect
The machine finds it difficult to detect the size of the following kinds of origi-
nals. If this happens, the receiving machine may not select print paper of the cor-
rect size. See P.16 “If the machine cannot detect the size of your original”.
• Documents set on the exposure glass of sizes other than those listed in the ta-
ble below
• Originals with index tabs, tags, or projecting parts
• Transparent originals, such as OHP transparencies or translucent paper
• Dark originals with many characters or drawings
• Originals which partially contain solid printing
• Originals which have solid printing at their edges
The following paper sizes are automatically detected in Facsimile mode.
Us21-1.tif
Us21-2.tif