Operating instructions

Faxing
20
2
E
Press the {
{{
{Start}
}}
} key.
The machine starts scanning the
original.
The machine calls the destination.
The name or fax number which is
programmed as the RTI or CSI at
the other end is shown on the top
of display (e.g. “
PARIS BRANCH
A4→A4 P001/P003
”).
Reference
P.41 “RTI/TTI”
After transmission, the machine
will return to standby mode.
Sending Originals from the
Exposure Glass
A Set the first page of your origi-
nal on the exposure glass face
down.
B Dial.
C Press the {
{{
{Start}
}}
} key.
The machine starts scanning the
original.
D Set the next original on the ex-
posure glass within 60 seconds
after the machine has finished
scanning the first original.
Note
❒ Repeat steps C to D for all
pages.
E Set the last original then press
[#
##
#].
F Press the {
{{
{Start}
}}
} key.
The machine starts to call the
destination.
-
--
- Checking the Transmission
Result
• Turn the Transmission Result Re-
port on if you want a report to be
printed after every successful
transmission. ⇒ P.18 “Memory
Transmission”
If you leave the Transmission Re-
sult Report off, the report will not
be printed after every transmis-
sion. However, should a transmis-
sion fail, a Communication Failure
Report will be printed instead.
• If you turn the Transmission Re-
sult Report (Memory Transmis-
sion) off, the Error Report will be
printed when the communication
on fails.
• You can also check the transmis-
sion result by examining the TCR.
See Chapter4, “Printing the TCR”
in the Advanced Features manual.
You can either print or scroll
through the TCR on the display.
See Chapter4, “Checking the
Transmission Result (TX File Sta-
tus)” in the Advanced Features
manual.
D
ial
k
Dial
LTWO261E.eps
Us15-1.tif
Us28-1.tif