Operating instructions

Faxing
36
2
B
Press the Quick Dial key in which
the destination's number is pro-
grammed.
If the destination's name has been
stored, the name is shown on the
display. If it is not, the fax number
is shown.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If you wish to dial another des-
tination, press [Add] and dial an-
other fax number.
C
Press the {
{{
{Start}
}}
} key.
Speed Dials
If you store a number in a Speed Dial,
when you want to dial it, just press
the {Speed Dial} key followed by a 2 or
3 digit code. ⇒ P.52 “Registering Speed
Dial”
Note
❒ To check the contents of registered
Speed Dials, print the Speed Dial
list.
❒ As standard, you can use codes 00-
99 for Speed Dials. If the optional
Expansion Memory is installed,
codes 000 to 999 become available.
❒ If a search letter is registered with
a Speed Dial, you can find this
number quickly using the Tele-
phone Directory feature.
❒ You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
A
Place your original and select any
scan settings you require. ⇒
⇒⇒
⇒ P.29
“Scan Settings”
B
Press the {
{{
{Speed Dial}
}}
} key.
C
Enter the two digit code (00 to 99)
or three digit code (000 to 999) for
the destination with the number
keys.
If the destination's name has been
programmed, the name is shown
on the display. Otherwise, the fax
number is shown.
01 02 03 04 05 06 07
08 01 10 1 1 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
A B C D E F
H I K L M N
O P Q RSTU
VWX Y Z
G
J
ND2L05E1
ND2L05E1.eps
Us50-1.tif
Speed Dial
On Hook Dial
Pause /
Redial
Tone
LTWO240E.eps
Us51-1.tif
Us51-2.tif