Operating instructions

G3 Analog Line
43
3
G3 Analog Line
This function must be set up before
you connect the machine to a G3 ana-
log line.
You can register the following items
with a G3 analog Line:
• PSTN Line Type (Dial Pulse/Tone)
• In some countries, the PSTN Line
Selection is not available. For de-
tails, please contact your service
representative.
• CSI (up to 20 digits)
• Own Analog Number (up to 16
digits)
Note
❒ A CSI (Called Station Identifica-
tion) is notified to a receiver or
sender when you send or receive a
fax. When the CSI is received, it is
shown on the display or printed in
a report by the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine.
❒ The CSI can contain numerals, a
plus sign (+), and spaces. You usu-
ally should register your country
code, area code (minus the leading
zero) and your fax number in that
order.
❒ Specify your own analog number
(the telephone number to which
your machine is connected) so that
the transfer station can return the
Transfer Result report to you. You
can program numbers and a pause
in your own number. Be sure to en-
ter a pause after the area code.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” with the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↓
↓↓
↓Next].
D
Enter the function number for
“G3 Analog Line” with the
number keys.
Us28-1.tif
Adjustment User Tools Program Energy Saver Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us193-3.tif