Operating instructions

Groups
61
3
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{UserTools}
}}
} key.
C
Enter the function number for
“Register/Delete” using the
number keys.
D
Enter the function number for
“Reg. Opt. G.Dial” using the
number keys.
E
Enter the Optional Group number
(10 to 30) you want to register us-
ing the number keys.
Note
❒ If you make a mistake with the
first digit, press the {Clear/Stop}
key and enter a correct number.
If you make a mistake with the
second digit, press [Cancel] and
enter the number again.
❒ You can press [Status] to see the
currently registered Optional
Groups.
F
Enter the first destination, then
press [Add] before entering the
next.
Note
❒ You can enter destinations in
any of the following three ways:
• Enter a fax number with the
number keys.
• Press a Quick Dial key in
which a destination is regis-
tered.
• Press the {Speed Dial} key
and enter a code.
Us28-1.tif
Adjustment User Tools Program Energy Saver Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Us137-2.tif
Us146-1.tif
Us146-2.tif
Usfax-new039.tif
Us146-4.tif