Operating instructions

Groups
63
3
Deleting Optional Groups
This function deletes all destinations
registered in an Optional Group.
Limitation
❒ If a registered Optional Group is
being used for a standby Memory
Transmission, the message
“This
destination is in use for a
standby transmission file.
Please modify/delete after
transmission”
is shown and you
cannot change destinations for this
Group.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile} key.
B
Press the {
{{
{UserTools}
}}
} key.
C
Enter the function number for
“Register/Delete” using the
number keys.
D
Enter the function number for
“Delete Opt.G.Dial” using the
number keys.
E
Enter the Optional Group number
(10 to 30) you wish to delete using
the number keys.
Note
❒ If you make a mistake with the
first digit, press the {Clear/Stop}
or [Cancel] and enter the correct
number. If you make a mistake
with the second digit, press No
and enter the number again.
❒ You can press [Status] to see
which Optional Groups are pro-
grammed.
Us28-1.tif
Adjustment User Tools Program Energy Saver Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Us146-1.tif
Us148-2.tif
Usfax-new041.tif