Fax Machine Operating Instruction

More Transmission Functions
33
3
ECM (Error Correction Mode)
This feature automatically sends data
that was not transmitted successfully
using a system that complies with in-
ternational standards.
ECM requires that the destination
machine has the same feature.
Parallel Memory Transmission
This function dials while the original
is being scanned. Standard Memory
Transmission stores the original in
memory, then dials the destination.
Parallel Memory Transmission al-
lows you to quickly determine
whether a connection was made. In
addition, this function scans the orig-
inal faster than Immediate Transmis-
sion and is useful when you are in a
hurry and need to use the original for
another purpose.
Note
❒ By default this feature is turned on.
You can change this with the User
Parameters. See P.72 “User Parame-
ters” (Switch07, Bit2).
Limitation
❒ Standard Memory Transmission is
used instead of Parallel Memory
Transmission in the following cas-
es.
• When the line is busy and could
not be connected to
• With Send Later
• With Transfer Request
• When you store an original for
Memory Transmission while an-
other communication is in
progress
• When two or more destinations are
specified
• When the original is set on the ex-
posure glass
Note
❒ If you press the {Clear/Stop} key,
the original jams, or memory be-
comes full during Parallel Memory
Transmission, the machine stops
transmitting and prints the Com-
munication Result Report. The file
is erased.
❒ Total stored page numbers are not
printed in the Parallel Memory
Transmission. Only the page num-
bers are printed, such as P.1, P.2
not 1/2, 2/2.
❒ If you run out of memory, normal
Memory Transmission takes place.