Fax Machine Operating Instruction

Faxing
30
2
Dialing
There are three main ways to dial a
number:
❖
❖❖
❖ Number keys:
Enter numbers directly using the
number keys on the right side of
the operation panel.
❖
❖❖
❖ Quick Dials:
When you have stored a destina-
tion's number in a Quick Dial key,
you can dial the number by just
pressing that key. Additionally,
you can store a name that will ap-
pear on the display whenever you
press that Quick Dial.
❖
❖❖
❖ Speed Dials:
If you store a number in a Speed
Dial, when you want to dial it just
press the {Speed Dial} key followed
by a 2 digit code. Like Quick Dials,
you can store a name along with
the number.
This section covers these features and
others in more detail.
Number Keys
Enter numbers directly using the
number keys on the right side of the
operation panel.
Note
❒ Maximum length of a fax number:
254 digits.
❒ You can insert pauses and tones in
a fax number. P.31 “Pause”, P.32
“Tone”
A
Make sure that the machine is in
standby mode.
B
Set your original and select any
scan settings you require.
C
Enter the fax number with the
number keys.
The digits appear on the display as
you enter them.
Note
❒ If you make a mistake, press the
{Clear/Stop} key to erase the
wrong digits and try again.
❒ If you wish to send this message
to more than one destination,
press the {OK} key, then enter
the next destination.
D
Press the {
{{
{Start}
}}
} key.