Fax Machine Operating Instruction

Transfer Request
13
1
Transfer Request
Transfer Request allows fax machines
that have this feature to automatically
distribute incoming messages onto
multiple fax destinations. This feature
helps you save costs when you send
the same message to more than one
place in a distant area, and saves time
since many messages can be sent in a
single operation.
The diagram below may make the
concept clearer.
The Transfer Stations you specify
must be machines of the same make
as this machine and have the Transfer
Station function.
Preparation
Before using this feature, you must
program the Polling ID. See P.81
“Polling ID”.
Polling ID's of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
Before using this feature, you must
program the Transfer Report. See
P.85 “Transfer Report”.
The following terminology is used in
this section.
❖
❖❖
❖ Requesting Party
The machine where the message
originates from, that is, the ma-
chine making a Transfer Request
(in this section, this machine).
❖
❖❖
❖ Transfer Station
The machine that forwards the in-
coming message to another desti-
nation, that is, the machine that
receives the Transfer Request.
❖
❖❖
❖ End Receiver
The final destination of the mes-
sage, that is, the machine that the
Transfer Station sends to. End Re-
ceivers must be programmed into
Quick Dials, Speed Dials or
Groups in the Transfer Station.
Limitation
❒ You can specify only one Transfer
Stations in a Transfer Request.
❒ You can have up to 30 End Receiv-
ers per Transfer Station. If you
specify a Transfer Station Group,
the Group counts as a single re-
ceiver.
❒ The combined total of End Receiv-
ers and Transfer Stations you spec-
ify with the number keys cannot
exceed 30.
A
Set your original and select any
scan settings you require.
B
Press the {
{{
{Transmission Option}
}}
} key.
Transfer
Station
Requesting
party
Transfer
Result Report
End Receiver
End Receiver
End Receiver
ND1X01E9