Use And Care Manual

11
Assembly Instructions
5
6
Floor mounting
As shown below, the pre-installed base plate is installed on the beam of the front
plate and is fastened with M6x12 screw
B
Hardware Used
M6x12 : x2
Hardware Used
Assembly of frame rail A
Insert the frame bar into the mounting hole of the right front leg and flip it 90
degrees so that the frame bar is positioned vertically on the right front leg.
Fig.9
Fig.10
5.底板的装配
如下图，将预装好的底板安装在前板横梁上，并用M6x12螺钉紧固
6.车架档杆A的装配
如下图，将车架档杆插入右前支腿的安装孔内，并翻转90度，使得车架档杆垂直安放在右前支腿上。